Skip to main content

General Sound Micron 631 + 1011 2.1 Speaker System

This is an impressive set of speakers.  Made in the USA, with beautiful workmanship, innovative design and excellent sound.  There is not a lot of information about this company other than a few pieces that people may have commented over the internet.  But, regardless of how little information there is about this company, the sound quality and build quality of these speakers are highly regarded.  Not to mention, they are well designed and look very elegant.  This happens to be our second pair of Microns, the first set we had was the 421 with the same 1011 passive sub and found a loving home. 

Not to mention, wood lovers will love the look as they are wrapped in real wood veneer.

From what I can find the 631 was their TOTL bookshelves speakers for this particular series.  The bookshelves are 3-way, featuring a 6" woofer, 2.5" midrange cone driver and 1" dome tweeter.  They are wrapped in a well made cabinet with rounded edges and the front are fitted with a beautiful brass trim.  The drivers are recessed for the "time aligned" phasing.  It's just another design manufacturers used to improve phasing and provide the best sound quality in their design.  Neat design, that's for sure.

The 1011 passive sub, or bass extender is basically for the low end frequencies as we all know that bookshelves speakers tend to lack in the lower end frequencies due to size of the driver.  As with the speakers themselves, the 1011 is well made, the top is a laminate while the rest is wrapped in real wood veneer.  Probably meant to be used as a table end for easy clean for spills.

The 1011 uses a dual voice coil driver (12" driver) and while it's no monster in the bass department, it really fills the room with detailed bass that if placed properly, it would seem the bookshelves are doing all the work.  However, the attenuators for the mid and  treble are on the bottom of the sub.

Overall, they are in excellent shape besides a few scratches on the 1011.

For sound they are a very detailed speakers.  They have very good extension, it's quite dynamic and very transparent.  They are perfect for those looking for a clean sounding pair of speakers with a very neutral sound signature.  I would say they're quite musical if not a tad towards the analytical side.  And, the bass is not overwhelming at all, it's detailed, good depth and punch and matches well with the rest of the system.  Of course, personally, I really love the look of the speakers.

Popular posts from this blog

Yamaha YP-66 Turntable

The rosewood vinyl wrapped twin sibling of the Yamaha YP-221, they are the exactly the same other than the colour of the plinth and instead of silver plastic bits on the YP-221 the YP-66 has black bits. This is your typical belt drive turntable of the mid to late 70s.  It's a 2-speed with automatic return (semi-automatic).  It's a nice entry level turntable with all the decent built quality that you find on majority of the Japanese made tables of that era.  It has a good sized motor and a decent weight.  Yamaha tables are like Sony tables, they always have decent quality components and they always look nice to the eyes.  The slight smoked dustcover and the rosewood plinth makes it quite unique to look at. Sadly, the antiskate weight on our isn't original.  It was missing when we got it.  After a bit of research we found the appropriate weight and found an appropriate weight to retrofit into our table.  We found a nice brass weight to fit with ...

Micro Seiki MR-622 Turntable

This is one of my greatest prize possessions, well for turntables.  The Micro Seiki MR-622 is a fabulous turntable, and definitely has been one of my favourite tables that I had the pleasure of owning. Everything about this turntable screams quality.  Even the 45rpm adapter seemed to be milled aluminum.  It has adjustable feet, a side pocket for accessories , a nice heavy die cast platter and even the top part of the plinth is cast.  All wrapped in a beautiful smoked dustcover and real wood sides. The Micro Seiki MR-622 is a fully manual, 2-speed, direct drive turntable.  This means, it's low maintenance and high reliability as there is less moving parts within the turntable.  It's just a huge motor, speed controls and Micro Seiki MA-202 tone arm, placed in a overly built plinth just like what one would expect from Micro Seiki. The MA-202 tone arm is a S-shaped tone arm with excellent tracking ability.  It has an adjustable counterweight and the...

Energy Encore 2 Speakers

My family were the original owners of these speakers. We actually had the entire Energy Encore 5.1 surround set, minus the integrated stands. Slowly, the rear speakers were sold. I kept the subwoofer to use with my sound bar, and the center channel broke. All that remained were these little guys sitting on the same shelving unit for the past 15ish years. I used them for a bit for my computer setup but, opted to use my Mirage Omni 350 instead. While these are considered "big box store" speakers, they are still great little speakers. These were made in Canada. Used their hyperdome aluminum tweeter that made Energy famous from the Pro22 days (thank you Burhoe!). A super nice black piano finish and sealed box, with a 4" long throw woofer. Some Specifications that I took from the web: System Type: Magnetically shielded acoustic suspension satellite Tweeter: 1" (28mm) Aluminum dome with cloth suspension Woofers: 4" (112mm) Multi-laminated aluminum polycarbonate c...