Toshiba SR-355 Turntable

Here is a great turntable. Now I know Toshiba doesn't raise much attention, but sometimes it has it's advantages. While some may snub their nose at the name, there is a lot of beauty on this turntable. First, it weights ~26lbs, and that's pretty heavy. Second, it has a beefy direct drive motor. Third, it has heavy platter. Fourth, the plinth is uses a metal/steel top for added vibration control. And finally, if you can't seem to find any information about this turntable, instead of using Toshiba SR-355, look under Aurex SR-355.

What's Aurex? That was Toshiba's namesake for their higher end gear, like how Acura is for Honda. This was named Aurex SR-355 in Japan as they thought it would compete with some of the bigger name. And, in a way I can see why.

It is truly a well built turntable. It's a direct drive, 2-speed and fully manual turntable. Comes with a new Pickering V15 cartridge as it seems to be a better match over the Shure.

Yamaha YP-66 Turntable

The rosewood vinyl wrapped twin sibling of the Yamaha YP-221, they are the exactly the same other than the colour of the plinth and instead of silver plastic bits on the YP-221 the YP-66 has black bits. This is your typical belt drive turntable of the mid to late 70s. It's a 2-speed with automatic return (semi-automatic). It's a nice entry level turntable with all the decent built quality that you find on majority of the Japanese made tables of that era. It has a good sized motor and a decent weight. Yamaha tables are like Sony tables, they always have decent quality components and they always look nice to the eyes. The slight smoked dustcover and the rosewood plinth makes it quite unique to look at. Sadly, the antiskate weight on our isn't original. It was missing when we got it. After a bit of research we found the appropriate weight and found an appropriate weight to retrofit into our table. We found a nice brass weight to fit with the design. And, as usual,

Energy Encore 2 Speakers

My family were the original owners of these speakers. We actually had the entire Energy Encore 5.1 surround set, minus the integrated stands. Slowly, the rear speakers were sold. I kept the subwoofer to use with my sound bar, and the center channel broke. All that remained were these little guys sitting on the same shelving unit for the past 15ish years. I used them for a bit for my computer setup but, opted to use my Mirage Omni 350 instead. While these are considered "big box store" speakers, they are still great little speakers. These were made in Canada. Used their hyperdome aluminum tweeter that made Energy famous from the Pro22 days (thank you Burhoe!). A super nice black piano finish and sealed box, with a 4" long throw woofer. Some Specifications that I took from the web: System Type: Magnetically shielded acoustic suspension satellite Tweeter: 1" (28mm) Aluminum dome with cloth suspension Woofers: 4" (112mm) Multi-laminated aluminum polycarbonate c

Micro Seiki MR-622 Turntable

This is one of my greatest prize possessions, well for turntables. The Micro Seiki MR-622 is a fabulous turntable, and definitely has been one of my favourite tables that I had the pleasure of owning. Everything about this turntable screams quality. Even the 45rpm adapter seemed to be milled aluminum. It has adjustable feet, a side pocket for accessories , a nice heavy die cast platter and even the top part of the plinth is cast. All wrapped in a beautiful smoked dustcover and real wood sides. The Micro Seiki MR-622 is a fully manual, 2-speed, direct drive turntable. This means, it's low maintenance and high reliability as there is less moving parts within the turntable. It's just a huge motor, speed controls and Micro Seiki MA-202 tone arm, placed in a overly built plinth just like what one would expect from Micro Seiki. The MA-202 tone arm is a S-shaped tone arm with excellent tracking ability. It has an adjustable counterweight and the tone arm pipe is filled w

Audioless Winnipeg Group!

Search This Blog